Validation of LEOSPHERE WINDCUBE V2 unit WLS7-258 at TNO LiDAR Calibration Facility, for offshore measurements at Lichteiland Goeree
report
As part of the North Sea offshore wind conditions measurement program a Leosphere LiDAR is installed at Lichteiland Goeree on 24 October 2019. In order to assure high quality measurements, the LiDAR unit (Leosphere Windcube, WLS7-258, firmware 1.1.15) was validated at the TNO LiDAR Calibration Facility (TLCF) for the period of 12 July 2019 until 8 September 2019. The validation is performed by checking Key Performance Indicators (KPIs).
The comparison is performed for three measurement heights: 41.9 m, 81.4 m, and 120.9 m and the KPIs resulting for the validation are listed in table 1. Based on these results TNO qualifies this LiDAR unit as suitable for offshore application at LEG.
The comparison is performed for three measurement heights: 41.9 m, 81.4 m, and 120.9 m and the KPIs resulting for the validation are listed in table 1. Based on these results TNO qualifies this LiDAR unit as suitable for offshore application at LEG.
Topics
TNO Identifier
875145
Publisher
TNO
Collation
20 p.
Place of publication
Petten