Searched for: author:"Akkerman, H.B."
(1 - 17 of 17)
document
Oliveira A.M., (author), Akkerman H.B., (author), Braccini S., (author), Breemen A.J.J.M. van, (author), Manzano L.G., (author), Heracleous N., (author), Katsouras I., (author), Leidner J., (author), Murtas F., (author), Peeters B., (author), Silari M., (author)
Quality Assurance (QA) in hadron therapy is crucial to ensure safe and accurate dose delivery to patients. This can be achieved with fast, reliable and high-resolution detectors. In this paper, we present a novel solution that combines a triple Gas Electron Multiplier (GEM) and a highly pixelated readout based on a matrix of organic photodiodes...
article 2021
document
van Breemen, A.J.J.M. (author), Simon, M. (author), Tousignant, O. (author), Shanmugam, S. (author), van der Steen, J.L. (author), Akkerman, H.B. (author), Kronemeijer, A. (author), Ruetten, W. (author), Raaijmakers, R. (author), Alving, L. (author), Jacobs, J. (author), Malinowski, P.E. (author), de Roose, F. (author), Gelinck, G.H. (author)
A curved image sensor on plastic foil has been developed for cone beam computed tomography (CBCT) X-ray imaging. The image sensor of about 6 × 8 cm2 size has been built on a thin polyimide foil with an indium gallium zinc oxide (IGZO) backplane and an organic photodetectors (OPD) frontplane. A flexible cesium iodide (CsI) scintillator has been...
article 2020
document
Peters, L.C.J.M. (author), Ollearo, R. (author), Verbeek, R.G.F.A. (author), van der Steen, J.L.P.J. (author), Akkerman, H.B. (author), Volker, A.W.F. (author), van Neer, P.L.M.J. (author), Gelinck, G.H. (author)
Large-area flexible ultrasound arrays can offer new ultrasound modalities in multiple fields. The production of these arrays when using CMOS-type fabrication techniques faces scalability challenges and costs increase dramatically when upscaled to large dimensions. We investigate the monolithic production of large-area PPT (Printed Polymer...
conference paper 2019
document
van de Weijer, P. (author), Akkerman, H.B. (author)
In order to protect a flexible OLED on plastic foil against water from the ambient atmosphere a top and bottom thin-film encapsulation (TFE) is necessary. A TFE stack SiN-OCP-SiN with getter in OCP results in excellent shelf lifetime. However, the getter particles result in light scattering that is lost upon water ingress in the stack. As a...
article 2019
document
Tordera, D. (author), Peeters, B. (author), Akkerman, H.B. (author), van Breemen, A.J.J.M. (author), Maas, J. (author), Shanmugam, S. (author), Kronemeijer, A.J. (author), Gelinck, G.H. (author)
Organic photodetectors (OPDs) have attracted much attention in recent years, due to their promise in large-area light sensing applications. Here, high-resolution slot-die-coated large-area bulk heterojunction organic photodiode (OPD) arrays are reported. The OPD uses a novel electron transport layer, indium gallium zinc oxide in combination with...
article 2019
document
van Neer, P.L.M.J. (author), Volker, A.W.F. (author), Berkhoff, A.P. (author), Akkerman, H.B. (author), Schrama, T. (author), van Breemen, A. (author), Gelinck, G.H. (author)
Recently, there has been considerable interest in the development of ultrasound based mid-air haptic feedback devices. These devices allow for tactile sensations to be induced at any position and time without constraints to human motion, which is useful for virtual user interfaces, augmented/virtual reality and feedback buttons. The haptic...
conference paper 2018
document
Akkerman, H.B. (author), Pendayala, R. (author), Panditha, V.K.P. (author), Salem, A. (author), Shen, J. (author), van de Weijer, P. (author), Bouten, P.C.P. (author), Winter, S.H.P.M. (author), van Diesen-Tempelaars, K. (author), de Haas, G.J.A.J.F. (author), Steudel, S. (author), Huand, C. (author), Lai, M. (author), Huang, Y. (author), Yeh, M. (author), Kronemeijer, A.J. (author), Poodt, P. (author), Gelinck, G. (author)
We present a thin-film dual-layer bottom barrier on PI that is compatible with 350°C backplane processing for OLED displays. We demonstrate OLEDs that survive bending over 0.5 mm radius for 10.000x. Furthermore, we show compatibility of the bottom barrier with the backplane process by fabricating AMOLED displays on GEN1-sized substrates.
conference paper 2018
document
van de Weijer, P. (author), Akkerman, H.B. (author), Bouten, P.C.P. (author), Panditha, P. (author), Klaassen, P.J.M. (author), Salem, A. (author)
Side leakage experiments have been performed on the organic interlayer, so-called organic coating for planarization (OCP), in a hybrid thin-film encapsulation (TFE) stack based on two silicon nitride (SiN) barrier layers that was developed for organic light-emitting diodes (OLED). To measure the side leakage into OCP, a metallic Ca thin-film...
article 2018
document
Kronemeijer, A.J. (author), Katsouras, I. (author), Poodt, P. (author), Akkerman, H.B. (author), van Breemen, A.J.J.M. (author), Gelinck, G.H. (author)
We present recent developments on flexible a-IGZO TFT technology scaling in terms of TFT channel length and operating voltage, as well as manufacturing cost optimization with a focus on R2R processing compatibility. We present progress on the relevant technology building blocks; (i) R2R compatible TFT architecture, (ii) (multilevel) nanoimprint...
conference paper 2018
document
Akkerman, H.B. (author), Pendyala, R.K. (author), Panditha, P. (author), Salem, A. (author), Shen, J. (author), van de Weijer, P. (author), Bouten, P.C.P. (author), de Winter, S.H.P.M. (author), van Diesen-Tempelaars, K. (author), de Haas, G. (author), Steudel, S. (author), Huang, C.Y. (author), Lai, M.H. (author), Huang, Y.Y. (author), Yeh, M.H. (author), Kronemeijer, A.J. (author), Poodt, P. (author), Gelinck, G.H. (author)
We present a thin-film dual-layer bottom barrier on polyimide that is compatible with 350°C backplane processing for organic light-emitting diode displays and that can facilitate foldable active-matrix organic light-emitting diode devices with a bending radius of <2 mm. We demonstrate organic light-emitting diodes that survive bending over 0.5...
article 2018
document
van de Weijer, P. (author), Bouten, P.C.P. (author), Unnikrishnan, S. (author), Akkerman, H.B. (author), Michels, J.J. (author), van Mol, T.M.B. (author)
Organic light-emitting diodes degrade rapidly by means of local cathode oxidation when exposed to the ambient atmosphere, resulting in visible non-emissive areas called black spots. High performance inorganic based encapsulations are required to protect the OLED. We have applied a hybrid thin-film encapsulation stack consisting of two inorganic...
article 2017
document
van de Weijer, P. (author), Bouten, P.C.P. (author), Fledderus, H. (author), Janssen, R.R. (author), de Winter, S.H.P.M. (author), Akkerman, H.B. (author)
Local laser ablation of the cathode of OLEDs has been applied to create a population of pinholes of the same size. This enables the direct comparison at different conditions of black spots and grey spots in the emission of OLEDs as a result of water ingress into the device. We confirmed earlier observations on the operational effect of black...
article 2017
document
Fledderus, H. (author), Akkerman, H.B. (author), Salem, A. (author), Friedrich Schilling, N. (author), Klotzbach, U. (author)
We present the development of laser processes for flexible OPV on roll-to-roll (RR2R) produced thin film barrier with indium tin oxide (ITO) as transparent conductive (TC) bottom electrode. Direct laser structuring of ITO on such barrier films (so-called P1 process) is very challenging since the layers are all transparent, a complete electrical...
conference paper 2017
document
van de Weijer, P. (author), Lu, K. (author), Janssen, R.R. (author), de Winter, S.H.P.M. (author), Akkerman, H.B. (author)
When organic light-emitting diodes (OLEDs) are exposed to the ambient atmosphere, water penetration through pinholes in the cathode results in the formation of non-emissive areas (black spots) due to local oxidation of the cathode around the pinhole. This degradation effect severely limits the lifetime of OLED devices and requires high...
article 2016
document
Kronemeijer, A.J. (author), Huisman, E.H. (author), Akkerman, H.B. (author), Goossens, A.M. (author), Katsouras, I. (author), van Hal, P.A. (author), Geuns, T.C.T. (author), van der Molen, S.J. (author), Blom, P.W.M. (author), de Leeuw, D.M. (author), TNO Industrie en Techniek (author)
We have studied the electrical characteristics of close-packed monolayers of conjugated para-phenylene oligomers as a function of molecular length in large-area molecular junctions. An exponential increase in resistance with molecular length is observed, Rexp (βL), with β=0.26±0.04 Å-1 and β=0.20±0.06 Å-1 for dithiol and monothiol derivatives,...
article 2010
document
Akkerman, H.B. (author), Kronemeijer, A.J. (author), Harkema, J. (author), van Hal, P.A. (author), Smits, E.C.P. (author), de Leeuw, D.M. (author), Blom, P.W.M. (author), TNO Industrie en Techniek (author)
article 2009
document
van Hal, P.A. (author), Smits, E.C.P. (author), Geuns, T.C.T. (author), Akkerman, H.B. (author), de Brito, B.C. (author), Perissinotto, S. (author), Lanzani, G. (author), Kronemeijer, A.J. (author), Geskin, V. (author), Cornil, J. (author), Blom, P.W.M. (author), de Boer, B. (author), de Leeuw, D.M. (author), TNO Industrie en techniek (author)
The ultimate target of molecular electronics is to combine different types of functional molecules into integrated circuits, preferably through an autonomous self-assembly process. Charge transport through self-assembled monolayers has been investigated previously, but problems remain with reliability, stability and yield, preventing further...
article 2008
Searched for: author:"Akkerman, H.B."
(1 - 17 of 17)