The impact of CO₂ capture in the power and heat sector on the emission of SO₂, NO_x, particulate matter, volatile organic compounds and NH₃ in the European Union

The impact of CO₂ capture in the power and heat sector on the emission of SO₂, NO_x, particulate matter, volatile organic compounds and NH₃ in the European Union

Koornneef, J.
Ramirez, A.
van Harmelen, T.
van Horssen, A.
Turkenburg, W.
Faaij, A.
TNO Bouw en ondergrond

2010

This study quantifies the trade-offs and synergies between climate and air quality policy objectives for the European power and heat (P&H) sector. An overview is presented of the expected performance data of CO₂ capture systems implemented at P&H plants, and the expected emission of key air pollutants, being: SO₂, NO_X, NH₃, volatile organic compounds (VOCs) and particulate matter (PM). The CO₂ capture systems investigated include: post-combustion, oxyfuel combustion and pre-combustion capture. For all capture systems it was found that SO₂, NO_x and PM emissions are expected to be reduced or remain equal per unit of primary energy input compared to power plants without CO₂ capture. Increase in primary energy input as a result of the energy penalty for CO₂ capture may for some technologies and substances result in a net increase of emissions per kWh output. The emission of ammonia may increase by a factor of up to 45 per unit of primary energy input for post-combustion technologies. No data are available about the emission of VOCs from CO₂ capture technologies. A simple model was developed and applied to analyse the impact of CO₂ capture in the European P&H sector on the emission level of key air pollutants in 2030. Four scenarios were developed: one without CO₂ capture and three with one dominantly implemented CO₂ capture system, varying between: post-combustion, oxyfuel combustion and pre-combustion. The results showed a reduction in GHG emissions for the scenarios with CO₂ capture compared to the baseline scenario between 12% and 20% in the EU 27 region in 2030. NO_x emissions were 15% higher in the P&H sector in a scenario with predominantly post-combustion and lower when oxyfuel combustion (-16%) or pre-combustion (-20%) were implemented on a large scale. Large scale implementation of the post-combustion technology in 2030 may also result in significantly higher, i.e. increase by a factor of 28, NH₃ emissions compared to scenarios with other CO₂ capture options or without capture. SO₂ emissions were very low for all scenarios that include large scale implementation of CO₂ capture in 2030, i.e. a reduction varying between 27% and 41%. Particulate Matter emissions were found to be lower in the scenarios with CO₂ capture. The scenario with implementation of the oxyfuel technology showed the lowest PM emissions followed by the scenario with a significant share allocated to pre-combustion, respectively -59% and -31%. The scenario with post-combustion capture resulted in PM emissions varying between 35% reduction and 26% increase. © 2010 Elsevier Ltd. All rights reserved.

Earth & Environment
CAS - Climate, Air and Sustainability
EELS - Earth, Environmental and Life Sciences
Geosciences
Air pollutants
Air quality
CO₂ capture and storage
National Emission Ceiling Directive

http://resolver.tudelft.nl/uuid:f1401995-0de4-4375-bbb7-80a54a0095e4

346405

1352-2310

Atmospheric Environment, 44 (11), 1369-1385

article